Kistek Ryobi Low Profile 18V Battery Holder Installation Guide
Ryobi 18V Battery Holder – Low Profile by Kistek
The Ryobi One+ 18V Low Profile Battery Holder is a sleek design with active retention. This holder can be mounted in any orientation and the battery will lock into place for a secure fit.
Mounting Instructions:
1. Locate the surface to which the holder will be mounted. Space behind or underneath the surface will be required so that the battery stem can protrude.
2. Trace the battery stem opening in the holder.
3. Use a 1-1/2” (38 mm) hole saw to cut a hole where the battery stem will go. It is best to line up the edge of the hole saw with the curved edge of the battery stem opening.
4. Test fit with the battery to make sure it can be inserted and removed smoothly.
5. Clamp or hold the holder firmly in place and secure with the provided screws. You may pre-drill holes or use a punch.
6. The battery will lock into place using the tabs on the battery. To remove, depress the tabs and pull as you would to remove it from a Ryobi tool.
