Kistek Ryobi 18V Tall Battery Holder Installation Guide

               The Ryobi One+ 18V Tall Battery Holder does not require cutting a hole for the battery stem. It features active retention of the battery using the battery’s locking tabs. This holder can be mounted in any orientation.

Mounting Instructions:

1.       Locate the surface to which the holder will be mounted. Make sure there is enough space above the holder for the battery to be inserted and removed comfortably.

2.       Test-fit with the battery to make sure there is smooth operation and no obstructions.

3.       Once the final position is determined, either clamp the holder to the surface, or hold firmly with one hand and drive in the provided screws.  You may decide to pre-drill holes or use a punch. An extension may be needed to comfortably reach the screws.

4.       The battery will lock into place using the tabs on the battery. To remove, depress the tabs and pull as you would to remove it from a Ryobi tool.