Kistek Ryobi Tool Holder Installation Guide

Ryobi Tool Holder (Passive Retention) by Kistek

               The Ryobi Tool holder is for Ryobi One+ tools and has no active retention, which means that it needs to be mounted on a flat surface so that the tools sit upright. The holder comes with four #8 x 1” stainless steel screws so that mounting to a shelf will be simple. Mounting Instructions:

 1.       Locate a flat, sturdy shelf, preferably wood, and make sure there is enough room for the tool.

2.       Test-fit with the tool to make sure there are no obstructions.

 3.       Once the final position is determined, either clamp the holder to the surface, or hold firmly with one hand and drive in the provided screws. You may decide to pre-drill holes or use a punch. An extension may be needed to reach the back screws.

 4.       Place your tool over the tool holder to confirm final fit.